Untitled Document
RAPID AIR WEAPONS ACCESSORIES
Rapid Air Weapons Knee Riser
£

Knee Riser - Laminate Block
Manufactured to meet the needs of the modern day Field Target Shooter.
The Knee Riser has been made using nothing but solid high grade materials.
Fitting to the accessory rail on your rifle, it has the ability to move further than other risers on the market due to its long reach between pivot points.
A simple clamp system allows the riser to be moved into position with minimum disturbance to the shooter, its solid construction means it will stay where required, even at shallow angles where others fail to hold up to the high stress loads on the joints.
The locking screw is extra wide for maximum securing without damaging your rail, each joint has multiple positions that lock when clamped and an over travel stop has been incorporated in the system to help protect your rifle.
Machined from solid billets of aluminum with a stainless steel locking bolt and finished off with a laminate block.
Weight: 800 grams approx.
Overall height if arm was positioned at 90 degrees to block: 210mm and block is 25mm approx.
Rapid Air Weapons Knee Riser
£

Knee Riser - Walnut Block
Manufactured to meet the needs of the modern day Field Target Shooter.
The Knee Riser has been made using nothing but solid high grade materials.
Fitting to the accessory rail on your rifle, it has the ability to move further than other risers on the market due to its long reach between pivot points.
A simple clamp system allows the riser to be moved into position with minimum disturbance to the shooter, its solid construction means it will stay where required, even at shallow angles where others fail to hold up to the high stress loads on the joints.
The locking screw is extra wide for maximum securing without damaging your rail, each joint has multiple positions that lock when clamped and an over travel stop has been incorporated in the system to help protect your rifle.
Machined from solid billets of aluminum with a stainless steel locking bolt and finished off with a walnut block.
Weight: 800 grams approx.
Overall height if arm was positioned at 90 degrees to block: 210mm and block is 25mm approx.
Please note that the image features a laminate block.
Rapid Air Weapons Pellet Seat
£

Pellet Seat
For Break Barrel air rifles.
Can be used with .177, .20 or .22 pellets.
Quality engineered double ended pellet seat made from solid Aluminum.
Overall length of seat 82mm approx.
One end is pointed to insert pellet into rifling. The other has a ball machined to shape the skirt and seat the pellet more effectively into the breech.
Supplied with lanyard.
 
Untitled Document